How to Assemble a Klafsun Tanning Bed

Before you use your new tanning bed, you'll need to assemble it. Klafsun tanning beds come 95% pre-assembled with the bulbs already installed. The tanning bed will arrive in three separate pieces and all of the parts required are supplied. Assembling a Klafsun tanning bed will require some assistance to lift and steady the bench and canopy. Does this Spark an idea?

Clear out a space large enough to work. Open the boxes on the floor. Pay close attention to the box markings indicating which side is up.

Confirm all the parts needed for assembly are accounted for. Refer to the owner's manual for your model to determine what parts are needed. Contact the dealer or manufacturer if any parts are missing. Don't attempt to assemble the tanning bed if parts are missing.

Turn the bench seat upside down and install the ballast using the Allen bolts, washers and wrench supplied. Follow the graph in the owner's manual for your specific model.

Remove the base from the box. The base on some models comes in two pieces that will need to be connected before installation. Use the Allen bolts, washers and wrench supplied.

Turn the base upside down and align it with the bottom of the bench. Couple the bolt holes on both the base and bench. You will need an extra set of hands to lift and hold the base steady. Use the Allen bolts, washers and wrench supplied to secure the base to the bench.

Turn the bench and base upright. Align the hex holes on the canopy with the hex holes on the connecting arm, insert the hex bolts and tighten with a hex wrench. You will need help to lift and steady the canopy for this step.

Remove any protective film covering the tanning bed. Slide the bed into place and plug it in to a three-prong 120-V outlet.